|
|
 |
 |
 > PRODUCTS > Light Source > Optical Powermeter |
|
|
 |
Nanotek's optical powermeter, model NLS-OP01 is a 12-bit A/D resolution, auto-ranging High-Power Meter. Measurements are displayed on a large 4.5 digit LCD and can also be taken remotely via the RS232C port.
NLS-OP01 is designed to measure CW(continuous wave) optical power and is compatible with all of Nanotek's high-power semi-conductor photo-detectors.
Detectors connect to the NLS-OP01, in which the responsivity
and other information unique to the detectors are stored.
- High accuracy measurement
- Wide wavelength range
- Precise wavelength calibration setting
- Selectable display resolution
- Data display function
- RS232C interface
|
|
|
 |
|
|
 |
|
| ITEM |
DESCRIPTIONS |
| Signal Ranges |
Up to 4 decades(dependent on detector type) |
| Display |
4.5 digit, Back-light graphic LCD 128X64 |
| Display Update Rate |
75ms |
| Auto-Ranging Time |
200ms(typical) |
| Analog Output |
0 to 2V into 1 M¥Ø |
DC accuracy
Connectors
Detector Module
Analog Output
RS-232C
|
¡Â¡¾1%(typical)
12-pin sub mini DIN
BNC
9-pin D-Sub |
| Power |
100~120/220~240 VAC ¡¾10%, 50/60§Ô(Free-Voltage) |
| Power Range |
10§Ð to 2W with 1§Ð resolution |
| Dimensions |
228(W)X90(H)X162(D) §® |
| Weight |
About 2§¸ |
| Enclosure |
Metal case, Painted |
| Operating Environment |
0 to +40¡É;<70% RH non-condensing |
| Storage Environment |
-20 to +60¡É;<90% RH non-condensing |
|
|
|
|
| Model# |
OP01-H1 |
| Detector Material |
Si |
| Diameter[ §®] |
11.28 |
| Wavelength range[§¬] |
250-1100 |
| Attenuator |
OD3 |
|
| Model# |
U313-10 |
U365e-10 |
V405-05 |
V436-05 |
| Target wavelength[§¬] |
313 |
365 |
405 |
436 |
| Bandwidth[§¬] |
10 |
10 |
5 |
5 |
| Transmittance[%] |
15 |
25 |
35 |
45 |
| Diameter[ §®] |
25 |
25 |
25 |
25 |
|
|
|
 |
 |
|
|
|
